Sanitisers

JVLON

Ingredients
Chlorhexidine Gluconate Solution I.P 0.3% V/V
Eq. To Cetrimide 0.6% W/V
Colours Tartrazine & Sunset Yellow
Direction for Use
  • For all kinds of first aid, dilute 1 part of JVLON (by vol.) with 3 parts of water (by vol.)
  • Apply prepared solution on the wound by cotton swab.
Packaging Size

100ml, 500ml, 1L

 

JVSHIELD

Ingredients
Chlorhexidine Gluconate Solution I.P 2.5% V/V
Isopropyl Alcohol I.P with Emollients and Moisturizer Qs
Colour Carmoisine
Direction for use use undiluted
For Rapid Hand Antisepsis
  • Use 3ml of (2 pushes of dispenser) on clean, dry hands for 30 second for Hygienic Hand Disinfection.
  • Rub 9ml (6 pushes of dispenser) up to elbows for Surgical Hand Disinfection for 1.5 to 3 minutes.
For Skin Antisepsis
  • Apply on operative and pre – operative skin region to be treated. Allow to dry (up to 30 seconds before) should be applied full strength, as often as required, as a point or wet soak.
  • Paint skin 2 to 3 times for optimum results.
Precautions
  • Store in a cool place.
  • Avoid direct contact with eyes.
  • Easy to use skin compatible Hand rub, effective against bacteria including bacillus, fungi and viruses.
Packaging Size

100ml, 500ml, 5L

 

JVSHIELD 4

Ingredients
Chlorhexidine Gluconate Solution I.P 20% V/V
Chlorhexidine Gluconate 04% W/V
Indication
  • Broad spectrum microbicidal hand wash for immediate & persistent effect against normal & contaminant organisms.
  • Effective against GM +vs & GM –ve bacteria, fungi protozoa, yeasts, spores & viruses.
Applications
  • For scrubbing the patient.
  • As a surgical hand wash where prolonged & persistent microbicidal effect is required.
Added benefits
  • Harmless to skin.
  • Does not cause any dryness like alcoholic hand rubs.
  • Helps retain moisture level and skin softness.
  • Would not give any stains or marks on skin after application.
Direction for Use
  • To be applied pre – operatively on hand, up to forearms
  • Wet the hands and scrub vigorously for 2 – 3 minutes
  • Wipe with sterile towel after 5 minutes.
Packaging Size

100ml, 500ml, 5L

 

JVRUB

Composition

Each 100gm contains:

2 – Propanol I.P 45 gm
1 – Propanol 30 gm
Ethyl – Hexadecyl – Dimethyl Ammonium – Ethyl – Sulphate (Mecetronium Ethyl Sulphate) 0.2 gm
Skin Protecting Substance / Emollients. Direction for use:
  • Hygienic Hand Disinfection: Rub JVRub (Twice) 1.5ml or 2 pushes of calibrated pump well over clean, dry hands and nail grooves for 30 seconds.
  • Surgical Hand Disinfection: Rub JVRub (9ml or 6 pushes of pump), well over clean, dry hands, grooves & up to elbows rub for 1.5 minutes, keeping the skin moist.
Precaution
  • Keep away from children
  • Avoid direct contact with eyes.
Advantages
  • JVRub liquid hand rub, effective against Bacteria, Antibiotic Resistant Bacteria Tubercule Bacillus, Fungi, Viruses, including HCV.
Packaging Size

100ml, 500ml, 5L

JVDINE 10

Formula

Providone – Iodine IP 10% w/v (available iodine 1% w/v)

Purified Water IP qs.

Indication

Degerming of the skin pre and post operatively for all surgical procedures for the antiseptic treatment of superficial wounds, traumatic injuries, burns, vaginal preparation prior to a surgical procedures etc.

Further Information

JV Dine 10 antiseptic solution has a rapid and prolonged germicidal action against a wide spectrum of pathogenic organism including both gram positive and gram negative bacteria, fungi, protozoa, and viruses.

It is also active against bacterial spores. In the presence of blood, serum, purulent exudates and necrotic tissue, its activity persists as long as the colour remains. The golden brown colour serves to highlight the disinfected areas.

Direction for use

Should be applied full strength, as often as required, as a paint or wet soak.

Storage

Store protected from light at a temperature not exceeding 30°C

Packaging

100ml, 500ml, 2L

 

JVDINE Scrub

Formula

Providone – Iodine IP 7.5% w/v (available iodine 0.75% w/v)

Purified Water IP qs.

Indication

Degerming of the skin pre and post operatively for all surgical procedures for the antiseptic treatment of superficial wounds, traumatic injuries, burns, vaginal preparation prior to a surgical procedures etc.

Further Information

JV Dine Scrub antiseptic solution has a rapid and prolonged germicidal action against a wide spectrum of pathogenic organism including both gram positive and gram negative bacteria, fungi, protozoa, and viruses.

It is also active against bacterial spores. In the presence of blood, serum, purulent exudates and necrotic tissue, its activity persists as long as the colour remains. The golden brown colour serves to highlight the disinfected areas.

Direction for use

Should be applied full strength, as often as required, as a paint or wet soak.

Storage

Store protected from light at a temperature not exceeding 30°C

Packaging Size

100ml, 500ml, 2L

JV IPA

Composition

Each 100gm contains:

2 – Propanol I.P 45 gm
1 – Propanol 30 gm
Ethyl – Hexadecyl – Dimethyl Ammonium – Ethyl – Sulphate (Mecetronium Ethyl Sulphate) 0.2 gm
Skin Protecting Substance / Emollients. Direction for use:
  • Hygienic Hand Disinfection: Rub JV IPA (Twice) 1.5ml or 2 pushes of calibrated pump well over clean, dry hands and nail grooves for 30 seconds.
  • Surgical Hand Disinfection: Rub JV IPA (9ml or 6 pushes of pump), well over clean, dry hands, grooves & up to elbows rub for 1.5 minutes, keeping the skin moist.
Precaution
  • Keep away from children
  • Avoid direct contact with eyes.
Advantages
  • JV IPA liquid hand rub, effective against Bacteria, Antibiotic Resistant Bacteria Tubercule Bacillus, Fungi, Viruses, including HCV.
Packaging Size
  • 100ml, 500ml, 5L

 

JV DEX

Indication
  • Sterilisation: JV Dex Activated Glutaraldehyde Solution is indicated for use as a sterilant when used or reused, according to the instructions for use for up to a maximum of 14 days at 25°C with an immersion time of at least 10 hours.
  • High Level Disinfection: JV Dex Activated Glutaraldehyde Solution is indicated for use as a High Level Disinfection when used or reused, according to the instructions for use for up to a maximum of 14 days at 20°C with an immersion time of at least 20 hours.
Direction for Use
  • Activation: Activate the JV Dex Solution by adding the entire contents of the activator vial which is attached to the JV Dex Solution container. Shake well when activated, the Colour of solution changes to green. Record the date of activation on the space provided in a log book or a label affixed to a secondary container used for the activated solution.
  • Cleaning: Blood and other body fluids must be thoroughly cleaned from surfaces and lumens of devices before reprocessing. Thoroughly clean, rinse and rough dry devices before immersion in JV Dex Activated Glutaraldehyde Solution. Clean and rinse the lumens of hollow instructions before filling with JV Dex Activated Glutaraldehyde Solution. Please refer IFU for additional cleaning / decontamination instructions.
Usage
  • Immerse cleaned medical instruments / equipment completely in JV Dex Activated Glutaradehyde Solution for the required time at the appropriate temperature. (See indications for use above.)
Reuse Period
  • JV Dex Activated Glutaradehyde Solution can be reused for a maximum of 14 Days provided the required conditions of Glutaradehyde concentration, pH and temperature exists based upon monitoring described in the instructions for use. Do not rely soley on days in use. Test the activated solution prior to each use with JV Dex Solution Test Strips.
Packaging Size
  • 1 litre, 5 litres